MARINE PIPE CLAMPS & PIPE HANGERS

Samtan Engineering offers a full line of Pipe Clamps and Pipe Hangers in standard sizes from 1⁄4″ IPS through 6″ IPS approved for use on both hot & cold piping systems in Naval and commercial shipping.
Samtan pipe clamps and pipe hangers are manufactured in accordance with relevant sections of the following drawings:

  • NAVSHIPS Drawings #: 810-1385781, 810-1385782, 810-4714432, 845-2069186, 845-2445497, 845-2445498
  • BUSHIPS Drawings #: 845-1889878, 845-1889880

PIPE CLAMPS

Samtan pipe clamps are constructed using mild steel, stainless steel, or aluminum and are available in several configurations with a variety of finishes. The stainless and aluminum clamps are typically available plain; while the steel clamps are typically available plain, hot-dip galvanized, or painted with a weldable zinc chromate primer. Special finishes, such as heat-resistant coatings and epoxy coatings, are available per customer request.

Samtan Engineering pipe clamps are currently offered in several styles:

Figure I Clamp Diagram

Figure I 

Figure I shows the most common pipe clamp manufactured here at Samtan; the standard “clip type” pipe clamp. These clamps are offered with a neoprene rubber liner for cold systems or a fiberglass liner for steam and other high temperature applications.

Figure II Clamp Diagram

Figure II

Figure II illustrates a clip type clamp with an extended support leg. The extended leg is available in any length required by our customers. These clamps are offered with a neoprene rubber liner for cold systems or a fiberglass liner for steam and other high temperature applications.

Figure III Clamp Diagram

Figure III

Figure III depicts our welded single-leg clamp. This design features a support leg welded to the clamp body, with the leg available in any length required by our customers. These clamps are offered with a neoprene rubber liner for cold systems or a fiberglass liner for steam and other high temperature applications.

Figure IV Clamp Diagram

Figure IV

Figure IV shows the formed double-leg style of pipe clamp. The support legs are available in any length required by our customers. These clamps are offered with a neoprene rubber liner for cold systems or a fiberglass liner for steam and other high temperature applications.

KEYLOCK PIPE HANGERS

In addition to our pipe clamp line, Samtan Engineering also offers “Key-Lock” pipe hangers, rubber block pipe supports, and steel block pipe supports.

Samtan “Key-Lock” pipe hangers, available in standard sizes from 3/8″ through 4″ IPS, feature a mild steel or stainless steel hanger body with a welded (flat bar or angle) support leg, a neoprene rubber or fiberglass liner, and a locking key made from mild or stainless steel. The stainless steel hangers are typically available plain, while the mild steel clamps are typically available painted with a weldable zinc chromate primer. Special finishes, such as heat-resistant coatings and epoxy coatings, are available per customer request.

Keylock Holder Diagram

RUBBER BLOCK PIPE HANGERS AND STEEL BLOCK PIPE HANGERS

A popular alternative to our standard line of pipe clamps is our line of single- and multiple-pipe rubber block pipe hangers and steel block pipe hangers.

The rubber block hangers feature mild steel bars (or channels, depending on pipe size) sandwiching neoprene hanger blocks and are typically available with plain, hot-dip galvanized, or painted bars.

Rubber Block Hanger Diagram

The steel block hangers feature mild steel hanger blocks surrounding neoprene pipe bushings and are available with plain, hot-dip galvanized, or painted blocks.

Steel Block Hanger Diagram